Daily Archives: April 14, 2018

How to Get the Most from Industrial Lubricants and Additives

All industries have specific needs with regards to operating and maintaining their equipment. Lubricants are designed to limit the friction that occurs between moving parts, including those of industrial machinery. That way, they reduce the amount of wear and tear. By using lubricants for your industrial equipment, you ensure that the machine is operating optimally. It is essential to understand the right criterion for selecting industrial oils.

Identify the regulations and policies

All industrial facilities are governed by a variety of stringent policies and laws. The reason behind the existence of the rules and procedures is to ensure the safety of the people living in these environments. Sometimes the rules are made to protect the environment by regulating the use of potentially toxic substances. Therefore, you should ensure that the lubricant you select meets the quality standards required by the regulatory body in your area.

Composition of the lubricant

Heat is often a consideration when selecting oils. Friction between the parts of the industrial machine will result in the generation of heat. When in use, the composition of the Nitro 9 Industrial Lubricants should be sufficient in preventing overheating. If the lubricant cannot meet these specifications, it might cause more problems than the ones it was designed to avoid.


The viscosity of the lubricant you choose impacts performance. Oils that are incredibly thick might get caught in the moving parts and build up residues as well as other particulates. The build-up might shorten the lifespan of your equipment.

Functions of industrial lubricant additives

  1. Separate moving parts

Lubricants are usually used to keep moving parts apart. The separation is instrumental in reducing surface fatigue, vibrations, operating noise, and friction. Oils can achieve this function in several ways; with the most common being the formation of a physical barrier.

  1. Transfer heat

You can use either a gas or a liquid lubricant to transfer heat. However, the most effective one is the liquid lubricant, because it has a high specific heat capacity. Usually, the liquid oil is circulated from the cooler to the hotter parts of the system. However, the lubricant can be used to warm or cool an operation when the regulated temperature is needed. The current flow will also determine the amount of heat to be transferred in a particular unit of time.

  1. Minimize friction

Usually, the surface-to-surface friction of any system is higher when no lubrication is used, as compared to when you apply a lubricant. When you reduce the friction between the parts of your industrial equipment, you will lessen the possible tear and wear. In the end, your plant will operate at optimal efficiency. Some lubricants contain friction modifiers, which are used to bind metal surfaces chemically and consequently reduce surface friction.

The goal of every manufacturing process is to generate profits and minimize operational costs. One of the best ways of attaining this goal is to ensure that your machinery is adequately maintained. The use of lubricants and fuel additives for your industrial equipment cannot be overemphasized. You ought to select the right oil to ensure that your machine is at its best.…